Eurovan V6-2.8L (AXK) (2001)
Center Mounted Brake Lamp Bulb: Service and Repair
High-mount Brake Light
The high-mount brake light is installed on rear window.
High-mount brake light bulb holder, removing and installing
-
Depress retaining springs -arrows- and remove bulb holder.
-
Disconnect electrical connection.
-
Install in reverse order of removal.
High-mount brake light bulbs, replacing
CAUTION!
Do not touch glass portion of bulb with bare hands Even the smallest amount of moisture and/or contaminants from fingers that evaporates on
the bulb during operation can cause the glass to cloud over.
-
The bulbs (12 V/5 W) -2- are a push fit. They can be pulled out of and pushed into the bulb holder -1-.
-
Pull bulbs -2- straight out or push straight into bulb holder -1-.
-
Check brake light (bulb) function.