Eurovan V6-2.8L (AXK) (2001)
Display Group 4
-
Start engine and let run at idle. The temperature should climb uniformly
If specified value is not obtained:
-
Press the -> button.
-
Press buttons -0- and -6- to select "End Output" function 06. Press -Q- button to confirm input.
-
Switch ignition off.
-
Replace Engine Coolant Temperature (ECT) sensor -G62- with Engine Coolant Temperature (ECT) sensor -G2-.
NOTE: The temperature rises in increments of 1.0 °C.
-
Check DTC memory, repair any malfunctions and then erase DTC memory.
Evaluation display group 4, display field 3 - coolant temperature