Eurovan V6-2.8L (AXK) (2001)
/Page-666004.png)
-
Disconnect the 6-pin connector at the throttle valve control module (arrow).
-
Connect multimeter to terminal 2 + 6 of connector to make voltage measurement.
-
Switch ignition on. Specification: at least 4.5 V
-
Switch ignition off.
-
Connect multimeter to terminal 2 of connector and Ground (GND) for voltage measurement.
-
Switch ignition on. Specification: at least 4.5 V
-
Switch ignition off.
If specified values are not obtained:
