Eurovan V6-2.8L (AXK) (2001)
Engine Control Module: Application and ID
On Board Diagnostic (OBD), Technical Data
On Board Diagnostic (OBD), Technical Data
Control Module Identification
The control module version is indicated when the VAG1551 Scan Tool (ST), VAG1552 Scan Tool (ST) or the new VAS5051 tester is connected and the
control module for engine electronics is selected. Refer to " Scan Tool Testing/Scan Tool Connecting and Initial Checks " See: Testing and Inspection
Equipment
Engine Code
AXK
System identification
Motronic ME7.1
Emissions limits according to
TLEV
E-Gas system
Yes
On Board Diagnostic (OBD)
OBD II
Output Diagnostic Test Mode (DTM)
Yes
Type of data transfer to VAG1551/1552
Rapid data transfer
Oxygen sensor control
2 sensors
Knock sensor control
2 knock sensors
Intake manifold change-over
Yes
DTC memory
Permanent memory1)
Memory for adaptation values
Temporary memory2)
Camshaft adjustment
Yes3)
Boost pressure regulation
No
Secondary Air Injection (AIR) system
Yes
1) Independent of voltage supply.
2) Values are lost when voltage supply is interrupted.
3) Adjustment of the intake and exhaust camshaft.