Eurovan V6-2.8L (AXK) (2001)
-
VAG1551 scan tool (or VAG1552 mobile scan tool) with VAG1551/3B cable
-
VAG1598/31 test box
-
VAG1526 multimeter or VAG1715 multimeter
-
VAG1594 connector test kit
-
Wiring diagram
Test requirements
-
All fuses must be OK.
-
Battery voltage must be at least 11.5 volts.
-
Fuel Pump (FP) relay must be OK.
Test sequence
-
Connect VAG1551 scan tool (VAG1552). Start engine and select the Engine Control Module (ECM) using address word 01.
Connecting scan tool and selecting ECM. Refer to " Scan Tool Testing/Scan Tool Connecting and Initial Checks " See: Testing and Inspection
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -8- to select "Read measuring value block" function 08. Press -Q- button to confirm input.
Indicated on display:
Read measuring value block
Enter display group number XXX
-
Press buttons -0-, -4- and -1- to select "Display group number 41". Press -Q- button to confirm input.
Indicated on display: (1 to 4 = display fields)
Read measuring value block 41
->
1
2
3
4
-
Check the specified value for oxygen sensor heater in display field 4: