Eurovan V6-2.8L (AXK) (2001)
1. Heat shield
2. Bolt: Tighten to 10 Nm
3. Nut -M8- Tighten to 25 Nm, M10. 40 Nm
4. Exhaust manifold
-
2 piece
-
Always replace Exhaust manifold
5. Heat shield
-
for catalytic converter
6. Connector
-
Black, 6-pin
-
secured to subframe
7. Nut: Tighten to 10 Nm
8. Front exhaust pipe
-
for removing and installing: Remove Vehicle Speed Sensor (VSS) at transmission
9. Heated Oxygen Sensor (HO2S) G39-*, 50 Nm
-
Only use "G 052 112 A3" to grease thread; do not let "G 052 112 A3" get onto slit of oxygen sensor
-
use 3337 ring spanner to remove and install
10. Gasket
-
Always replace Exhaust manifold Gasket
11. Rubber damper
-
for front exhaust pipe, item 8
-
secured to subframe
12. Support