Eurovan V6-2.8L (AXK) (2001)
-
Turn relay panel over to access wiring to fuse and relay
-
Remove large wire from cavity #1 for fuse (S51) -arrow-
-
Illustration to the right shows large wire -arrow- removed from cavity #1
-
Remove red connector block (for relay #428) -arrow- from the relay housing
-
Locate large wire -3- from cavity 2 of the red connector for relay #428 and cut wire approximately 30 mm from terminal
NOTE: Cavity numbers are located on the connector at the terminal insertion points
-
Strip insulation from wire ends using VAS 1978/3 wire strippers from the VAS 1978 repair kit