Eurovan V6-2.8L (AXK) (2001)
-
Check for open circuits in wires between test box and connector according to wiring diagram.
Terminal 1 + socket 72
Terminal 2 + socket 73
Terminal 3 + socket 36
Terminal 4 + socket 35
Terminal 5 + socket 33
Terminal 6 + socket 34
Wire resistance: max: 1.5 Ohms
-
Also check wires for short circuits to B+ or Ground (GND).
-
Also check wires for short circuit to each other.
If no malfunctions are found in wires:
-
Replace accelerator pedal position sensor.
-
Perform work procedure "Procedure to follow after interruption of voltage supply":
-
Read readiness code:
-
If DTC memory was erased, readiness code must be re-generated: