Eurovan V6-2.8L (AXK) (2001)
/Page-128001.png)
Hazard Warning Switch: Service and Repair
Emergency Flasher Switch -E3-, Removing And Installing
Removing
-
Pull left and right instrument panel vents out carefully using needle-nosed pliers.
-
Remove center vent screws -arrows-.
-
Remove vent housing.
-
Unclip switch from mounting by depressing spring clips -arrows- and remove from mounting.
NOTE: Switch is shown removed for clarity.
-
Disconnect electrical connection.
-
Install in reverse order of removal.
