Eurovan V6-2.8L (AXK) (2001)
-
Install hold-down clamp and tighten M8 x 30 bolt -arrow- to 25 Nm (18 ft. lb.).
-
Clip in fuse holder.
-
After installing, ensure battery is seated securely.
CAUTION!
If battery is not secured properly, the following will result:
-
Shortened battery service life due to vibration damage.
-
Battery cell and plate damage.
-
Electrolyte leakage due to battery case damage.
-
Poor collision safety.
-
Install battery cover.
Second battery under driver's seat, removing
-
Operate lever -1- and slide driver's seat forwards onto stop.
-
Lift lever -2- up and slide seat completely forwards passed stop.
-
Switch off ignition and all electrical consumers
-
Disconnect battery in the following sequence: