Eurovan V6-2.8L (AXK) (2001)
^
3250 Support
^
With the vehicle stood on hard, level ground, loosen left-hand drive axle/wheel hub bolt -arrow- and left-hand wheel securing bolts.
^
Lift vehicle until the load on the front axle is relieved.
^
Remove left wheel.
^
Remove hex bolt for drive axle/wheel hub.
Vehicles from 01.96
Support device 3250 can no longer be used.
The torsion bars are relieved when vehicle is raised.
^
Measure distance from nut face to end of torsion bar threaded rod -a- and note.
^
Relieve tension on torsion bar with special tool 3257.
^
Remove noise insulation tray.