Eurovan V6-2.8L (AXK) (2001)
^
Remove flange shaft using VW 771 and VW 421.
^
Always replace flange shaft circlip.
^
Clamp flange shaft in vice using protective vice clamps.
^
Press circlip out of flange shaft groove using a new circlip -A-.
^
Pull flange shaft oil seal out using VW 771 and VW 771/37.
^
Half fill space between sealing lip and dust lip with grease G 052 128 A1.
^
Drive in oil seal as far as stop with VW 195.
^
Install flange shaft.
^
Install drive axle.
^
With transmission installed, check final drive oil level.
^
Install wheel.
^
Install noise insulation tray.