Eurovan V6-2.8L (AXK) (2001)
Pulling out wheel hub
^
Place separator (1) between wheel bearing housing and wheel hub, and pretension.
^
Installation position: Straight surface of blades point toward wheel hub.
^
Attach bell (2), hollow piston cylinder (3) with tie bolt, and special nut (4).
^
Pull out wheel hub while holding device securely.
1 - 17/2 Kukko separating tool
2 - Bell E-41-1 (T)
3 - Hollow piston cylinder HKZ-15
4 - Special nut E-8-214 and tie bolt
5 - High pressure hose with quick-release
^
Remove securing ring.
Pulling out wheel bearing
^
Attach pressure piece (1) with collar to bearing, pressure sleeve (2) with arrow to wheel bearing housing, hollow piston cylinder (3) with tie bolt
and special nut (4).
^
Pull out wheel bearing by actuating pump.
1 - Pressure piece E-21 (T)
2 - Pressure sleeve E-65-1
3 - Hollow piston cylinder HKZ-15
4 - Special nut E-8-214 and tie bolt
Pull bearing inner race off hub