Eurovan V6-2.8L (AXK) (2001)
Windshield: Service and Repair
Window Installation, Preparations
Window Installation, Preparations
Unbroken window
NOTE:
-
When an unbroken window is reused, cut back remaining adhesive material to 1 to 2 mm (1/32 to 5/64 in.) before re-gluing (with electric cutting
tool and scraping knife VAG 1561/8).
-
Remaining material serves as adhesive base for new adhesive
CAUTION: Do not prime or activate adhesive surface or treat it with cleaning solution. Keep adhesive surface dirt and grease free.
Exception: If gluing will not take place immediately after cutting back, remaining residual material must be activated with activator AMV 181 800 02
or equivalent.
-
Install molding on window.