Eurovan V6-2792cc 2.8L (AES) (1998)
Front Bumper: Service and Repair
Front Bumper, Removing and Installing (Long Front End)
Front Bumper, Removing And Installing (from 01.96) (long Front End)
Front Bumper, Removing And Installing (from 01.96) (short Front End)
Front Bumper, Removing And Installing (up To 12.95)
1
-
Cover
-
Remove radiator grille with trim frame.
-
Remove torx screws - 2 - and - 3 -.
-
Pull cover forward out of guides.
-
Note center faster (arrow)
2
-
Torx screw T 30 (4x)
-
6 Nm (53 in.lb)
3
-
Torx screw T 25 (2x)
-
1.2 Nm (11 in.lb)
4
-
Bumper beam
-
Disconnect right side then left
5
-
Guide bracket
-
To remove/install bumper beam, push/pull beam straight (parallel) out of guide bracket
6
-
Rivet
7
-
Hex screw (4x)
-
1.5 Nm (13 in.lb)
8
-
Cover bracket