Eurovan V6-2792cc 2.8L (AES) (1998)
-
Attach parking brake cable (arrow) to brake caliper housing.
-
Adjust parking brake. See: Parking Brake System/Adjustments
NOTE: Only depress the brake pedal after first adjusting the parking brake.
-
Install wheels.
NOTE:
^
After each brake pad change firmly depress the brake pedal several times with the vehicle stationary so that the brake pads are properly
seated in their normal operating position.
^
After changing brake pads check the brake fluid level.
Models With 16 Inch Wheels
Component Notes and Information
NOTE:
^
During service procedures, refer to the illustration above and the information below
^
After servicing calipers, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their normal
operating position.
^
To remove brake fluid from the reservoir use a bleeder bottle which is used only for brake fluid
WARNING: Brake fluid is poisonous.
1
Hex bolt
-
Always replace each time after removing
-
Tightening torque on vehicles with all wheel drive: