Eurovan V6-2792cc 2.8L (AES) (1998)
Thermostat Housing: Service and Repair
Engine coolant thermostat housing, disassembling and assembling
1. Thermostat housing
2. 10 Nm (7 ft lb)
3. Coolant thermostat
Installed position: breather slot/valve uppermost
Checking: Heat-up thermostat in water
Opening starts approx: 80°C
Ends approx: 105°C
Opening lift: 7 mm minimum
4. Connection
5. 10 Nm (7 ft lb)
6. O-ring
Replace
7. Connection
8. A/C Cut-out Thermal switch -F163-/Third Speed Coolant Fan Control Thermal switch -F165-
Brown, 4-pin
For vehicles with A/C.
Vehicles w/o A/C are plugged
9. Engine Coolant Temperature (ECT) sensor -G62-
Blue, 2-pin
For Motronic system
Checking, refer to Powertrain Management - Computers and Control Systems. See: Powertrain Management/Computers and Control
Systems/Testing and Inspection
10. After-run Coolant Thermal switch -F95-/Engine Coolant Temperature sensor -G2-
Yellow, 4-pin
Checking.
11. Retaining clip
Ensure proper seating