Eurovan V6-2792cc 2.8L (AES) (1998)
Headlamp Bulb: Service and Repair
Low And High Beam Twin Filament Bulb, Removing And Installing
Removing
-
Pull connector off twin filament bulb.
-
Remove cap on rear of headlight insert.
-
Release spring retainer -1- and fold down.
-
Take bulb out of reflector.
Installing
CAUTION!
DO NOT touch glass portion of bulb Moisture and contaminate residue from fingers will result in premature bulb failure
-
Insert new bulb so that the lugs on the laminated plate align with the grooves in the reflector.
-
After installing a new bulb check headlight adjustment.