Eurovan V6-2792cc 2.8L (AES) (1998)
Checking EVAP system is activated. You can see in display field 4 which function of leak check is active.
-
Check specifications in display field 3 and 4.
-
If leak check was successful, specifications look like this:
Display Field 153
If specifications were not obtained:
-
Repeat check.
-
Check DTC memory and then erase memory.
If malfunction is still not eliminated:
-
Check connecting lines and hoses between EVAP canister and tank flap unit or EVAP canister purge regulator valve 1 -N80-.
-
Check fuel filler cap gasket for damage.
-
Ensure fuel filler cap is tightly closed.
-
Check for tight hose connections to EVAP canister system in engine compartment.
-
Check all hoses and hose clamps for tight fit.
-
Check fuel pump gasket for damage, replace if necessary.
-
Ensure fuel pump union nut was tightened. Tighten with wrench 3217.
-
Check supply and return lines for leaks.