Eurovan V6-2792cc 2.8L (AES) (1998)
/Page-378002.png)
Evaluating display group 2
Voltage supply terminal 30, checking
-
Switch ignition off.
-
Connect VAG 1598/18 Test Box to ECM wiring harness.
-
Switch Fluke 83 multimeter to 20 Volt DC range.
-
Connect multimeter between Test Box sockets 1 + 54 using jumper wires from VW 1594 adapter kit.
-
specification: 12 to 14.5 Volts
If specification not obtained:
-
Check wiring using wiring diagram.
Voltage supply terminal 15, checking
-
Switch ignition off.
