Eurovan V6-2792cc 2.8L (AES) (1998)
Torsion Bar: Service and Repair
Removal and Installation
Special Tools and Equipment
^
3257 plug insert (27 mm)
Removing
^
Remove fuel tank
^
Remove heat shield for exhaust system (if installed), loosen exhaust system if necessary.
^
Measure projecting end of thread from nut to face side of threaded rod -a- and note value.
^
Release tension rod using 3257 plug insert.
^
Unbolt torsion bar from control arm and remove.
Notes:
^
Measure standing height.
^
Standing height adjustment values
Installing
Installation is the reverse of removal.