Eurovan V6-2792cc 2.8L (AES) (1998)
-
Curing time approx. 8 hours.
-
Adapt guide molding, cut to fit.
NOTE: Refer to EuroVan Body Collision Repair Manual for paint repair and corrosion protection.
-
Glue guide pieces in guide moldings.
-
Clean window, frame guide moldings, and adhesive surfaces with cleaning solution D 009 401 04 or equivalent and wipe dry with lint-free cloth.
-
Glue frame and movable window with silicone adhesive sealing compound (black) AMV 176 000 05 or equivalent.
-
Curing time approx. 8 hours.
-
Install sealing frame and install stop rail, seal fixed window with silicone sealing compound (black) AMV 176 000 05 or equivalent.
Side And Rear Window, Assembly Overview
Side And Rear Window, Assembly Overview
1
-
Side/rear window
-
Removing
Unbroken
Broken
-
Curing time
-
Re-sealing
2
-
PUR adhesive sealant
-
Bead cross section Width = 8 mm (1/3 in.) Height = 13 mm (1/2 in.)
-
Curing time
3
-
Window molding
-
Removing
- Remove lower window flange with fabric-reinforced tape.
- Cut window molding and pull off window with needle nose pliers.