Eurovan V6-2800cc 2.8L (AES) (2000)
Air Cleaner Housing: Locations
Air Induction Components,Locations
Note: Components marked with a * are checked via On Board Diagnostic.
1
Rubber mounting
2
Air Cleaner upper section
3
Filter element
4
O-ring
-
Replace if damaged.
5
Intake hose
-
Ensure it is seated tightly.
-
Goes to Secondary Air Injection Pump Motor V101.
6
4-pin harness connector
-
Black
-
For Mass Air Flow sensor G70
7
Mass Air Flow sensor G70*
8
Intake hose
-
Ensure it is tightly seated.
9
Vacuum hose
-
Goes to junction piece for EGR valve/intake manifold.
10
Positive Crankcase Ventilation Heater Element N79 for PCV valve
-
arrow on heater element points toward intake hose.
-
resistance specification at ambient temperature (approx. 25°C) :7 to 12 Ohms.
11
Positive Crankcase Vent valve
-
arrow on crankcase breather valve points to intake hose.
-
from cylinder head.