Eurovan MV V6-2.8L (AXK) (2002)
Pulsair Valve: Service and Repair
Combination valve, removing and installing
Removing
Note:
-
In the continuing work procedure the battery Ground (GND) strap must be disconnected. Therefore, determine whether a coded radio is installed.
If necessary, determine anti-theft coding first.
-
Remove cover at left above the battery.
-
Switch ignition off and disconnect battery Ground (GND) strap.
-
Remove engine cover -1-. To do so, remove 3 bolts (arrows).
-
Disconnect pressure hose -2- at combination valve -1-.
-
Disconnect vacuum hose at combination valve -1-.
-
Remove bolts (arrows) at connecting piece -3- of combination valve -1-.
Installing
Installation is the reverse of removal.
Note:
-
Replace seal between combination valve and connection piece.
-
If DTC memory was erased, readiness code must be regenerated