Eurovan MV V6-2.8L (AXK) (2002)
Fig. 16 Removing and Installing rubber bushing for coupling rod, on stabilizer side
^
Pry out rubber bushing using screwdriver as shown in illustration.
^
Press in new rubber bushing.
Note: Before pressing in, coat using lubricant, e.g. lubricating soap.
Fig. 17 Remove rubber bushing for coupling rod on control arm side
^
Press out bushing as shown in illustration.
^
Pry out rubber bushing using screwdriver.
Fig. 18 Install rubber bushing for coupling rod on control arm side
^
Press rubber bushing into coupling rod.
^
Press in bushing -A- as shown in illustration.
Note: Before pressing in, coat parts using lubricant, e.g. lubricating soap.