Eurovan MV V6-2.8L (AXK) (2002)
/Page-1229003.png)
^
VAG1332/5 open-end spanner insert (34 mm)
Removing
^
Remove front wheels.
^
Relieve torsion bar.
^
Unbolt both shock absorbers from control arm and completely slide upward.
^
Remove coupling rods from lower control arm.
^
Unbolt tie rods from steering gear.
a - VAG1332/5 open-end spanner -VAG1332 torque wrench
^
Remove front exhaust pipe.
Vehicles with reinforced stabilizer 27 mm
^
Unbolt bolt for universal joint at steering pinion and remove steering gear from steering column.
^
Unbolt steering gear from subframe.
Continuation for all vehicles
^
Unscrew clamp for stabilizer from subframe.
^
Turn stabilizer upward by approximately 90° and pull out toward left at the same time. Observe right coupling rod when removing stabilizer.
