GLI L4-2.0L Turbo (BPY) (2008)
Evaporative Emission Control Canister: Service and Repair
EVAP Canister
Removing
-
Remove the cover bolts - arrows - and remove the cover - A -.
-
Disconnect the lines - 1, 2 and 3 -. To do so, press in or press together the securing ring.
-
Press the locking mechanisms on the bolt points in the - direction of the arrow - using a screwdriver and remove the EVAP canister - 4 -.
Installing
Installation is performed in the reverse order of removal. When doing this note the following:
‹› Make sure the lines and EVAP canister are locked securely.
Tightening Specifications