GLI L4-2.0L Turbo (BPY) (2008)
Note: Disregard item - 3 -.
Installing
Installation is in reverse order of removal. Note the following:
Note:
^
Always replace seals.
^
Replace hose clamps.
^
Allocate all components.
-
Press in hose/line assembly - 1 - with new O-ring - 2 - into connection of master cylinder - 4 - until securing clip - 3 - engages audibly.
-
Check by pulling hose/line assembly.
-
Bleed clutch system .
-
Install battery carrier and battery.
-
Connect battery and follow work procedures after connecting battery.