GLI L4-2.0L Turbo (CCTA) (2008)
Variable Valve Timing Actuator: Service and Repair
Camshaft Adjustment Valve 1
Camshaft Adjustment Valve 1
Special tools, testers and auxiliary items required
‹› Torque wrench 5-60 Nm (VAG 1783)
‹› Open end spanner insert AF 10 (VAG 1783/1)
Removing
-
Remove the charge air pipe leading to the noise generator. Refer to --> [ Charge Air Pipe to Noise Generator ] See: Powertrain Management/Fuel
Delivery and Air Induction/Turbocharger/Intercooler/Intercooler Duct/Service and Repair.
-
Disconnect the electrical connector from the camshaft adjustment valve 1 - 1 -.
-
Remove the bolts - arrows - and remove the camshaft adjustment valve 1.
Installing
‹› Tightening specifications, refer to --> [ Timing Chain Covers Assembly Overview ] See: Timing Components/Timing Cover/Service and
Repair/Timing Chain Covers Assembly Overview.
Install in reverse order of removal. When doing this note the following:
‹› Coat the seal and the O-ring with engine oil.