GLI L4-2.0L Turbo (CCTA) (2008)
-
Place lower part of the valve seal removal tool 3364 onto valve stem seal.
-
Insert a drift - 1 - into bore in lower part of extractor device.
-
Place a lever at the removal tool and pull out the valve stem seal - arrow -.
Installing
-
Place plastic sleeve - A - on valve stem to prevent damage to new valve stem oil seals - B -.
-
Oil sealing lip of valve stem oil seal - B -, insert into valve stem seal driver 3365 and carefully slide onto valve guide.
-
Remove plastic sleeve - A -.
-
Insert valve spring and valve spring retainer.
-
Install valve cotter disassembly and assembly device VAS 5161 as shown:
Intake Side
Exhaust Side