GLI L4-2.0L Turbo (CCTA) (2008)
-
Pull the fuel level sensor slightly to the side and simultaneously upward.
-
Disengage the wire connectors - 1 through 3 - and disconnect them.
Installing
Version A
-
Insert the fuel level sensor into the guides on the fuel delivery unit and press up until engagement.
-
Connect the wire connectors and check for secure locking.
Version B
-
Connect the connectors and check for secure locking.
-
Insert the fuel level sensor in the guides on the fuel delivery unit and push down until engagement.
Continuation for Both Versions
-
Install the fuel delivery unit. Refer to --> [ Fuel Delivery Unit ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service
and Repair/Procedures/Fuel Delivery Unit.