Checking Lambda probe -G39- |
–
| Bring Lambda probe -G39- to operating temperature by increasing engine speed above 2000 rpm up for approx. 1 minute. |
–
| Connect Lambda probe cable. |
–
| Pull sealing cap from vacuum connection on carburettor (for temperature regulator): |
Air flap must slowly swivel slightly in closing direction. |
Air flap does not swivel in closing direction: |
Lambda probe -G39- carbon-fouled/defective, renew if necessary → Note |
1)
| Lambda probe -G39- may be carbon-fouled as a result of malfunction; if necessary, attempt to clear it by driving rapidly cross-country for 20 minutes. |
|
|
|