| The following “5 rules” for cleanliness are to be carefully heeded when working on the fuel supply/injection system: |
| t
| Thoroughly clean all unions and surrounding areas before disconnecting. |
| t
| Place removed parts on a clean surface and cover. Use only lint-free cloths. |
| t
| Carefully cover opened components or seal if repairs cannot be carried out immediately. |
| t
| Only install clean components: Replacement parts should only be unpacked immediately prior to installation. Do not use parts that have not been stored in their packing (e.g. in tool boxes etc.). |
| t
| When system is open: do not work with compressed air if this can be avoided. Do not move the vehicle unless absolutely necessary. |
|
|
|
