volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Coil spring allocation > < Repairing front suspension strut
Checking shock absorber
   
Checking shock absorber
During vehicle operation, defective shock absorbers cause knocking noises and must be renewed. Shock absorbers are maintenance-free. Replacement is not necessary in the case of slight traces of oil on the shock absorber. In the case of major oil loss, the shock absorbers can be abruptly compressed and/or extended. Shock absorber oil cannot be topped up.
1 - Shock absorber
q   Can be renewed separately.
2 - Protective sleeve
3 - Bump stop
4 - Coil spring
q   Removing and installing → Fig.
q   Coil spring allocation → Chapter.
5 - Washer
6 - Spring plate
7 - Suspension strut mounting
q   Renew only complete.
8 - Slotted nut, 40 Nm
q   Loosening and tightening → Fig..
q   First pre-tension coil spring → Fig..

   
Removing and installing spring/loosening and tightening slotted nut
  Note
t  Socket, 21 mm -3186- for 21 mm slotted nut shown in illustration; use socket, 22 mm -3078- for 22 mm.
  V40-0031
t  The suspension strut tensioner -V.A.G 1752- can also be used instead of -V.A.G 1403-.
  N40-10116

Coil spring allocation > < Repairing front suspension strut