Golf Mk3
| Assembly overview - bumper cover |
| 1 - | Cover |
| q | Material: PP/EPDM. |
| q | Removing: |
| – | Remove tail lights → Electrical system; Rep. Gr.94. |
| – | Unscrew the cover in the area of the wheel housing and unclip it from the body (see position → Item). |
| – | Remove bolts → Item. Pull cover off guides → Item (left and right-hand sides) and securing strip → Item. |
| 2 - | Securing strip |
| 3 - | Impact absorber |
| 4 - | Guide |
| q | To remove/install bumper, pull out or push in parallel to guides on left and right. |
| 5 - | Clip |
| q | Qty. 4 |
| 6 - | Bolt |
| q | Qty. 6 |
| q | 1.2 Nm |
| 7 - | Bolt |
| q | Qty. 8 |
| 8 - | Plugs |
| q | Qty. 4 |
| 9 - | Bumper strip |
| q | Clipped into cover → Item. |
| 10 - | Spoiler |
| q | Clipped into cover. |
| q | Is not necessary to remove when removing the cover. |
| 11 - | Spreader clip |
| q | Qty. 2 |