volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Display group overview > < Final control diagnosis
Body self-diagnosis
Self-diagnosis for convenience system
Reading measured value block

Special tools, testers and auxiliary items

  • ◆ Fault reader V.A.G 1551 with cable V.A.G 1551/3
  • ‒ Connecting fault reader .

The measured values in the functions read measured value block and basic setting are described during the individual component test. This table serves only as an overview.

The measured value block is divided into 16 display group numbers. The assignment of the individual display zones can be taken from the display group overview from page 01-167 .

 
→ Indicated on display:
Rapid data transfer     HELP
Select function XX
  • ‒ Press keys -0- and -8- (08 initiates the "Read measured value block" function).
 
→ Indicated on display:
Rapid data transfer      Q
08 Read measured value block
  • ‒ Confirm entry with the Q key.
 
→ Indicated on display:
Read measured value block     HELP
Input display group number XX

The display group number 001 is an example, to illustrate the sequence.

  • ‒ Press keys 0, 0 and 1 for "Display group number 1" and confirm entry with Q key.
 
→ Indicated on display:
(1...4 = Display zones)
Read measured value block     1          "
     1     2     3     4

Note:

To change to another display group proceed as follows:

Display group

V.A.G 1551

V.A.G 1552

Higher

Press key 3

Press ↑key

Lower

Press key 1

Press ↓key

Skip

Press key C

Press key C

  • ‒ Displayed after pressing C key.
 
→ Indicated on display:
Read measured value block     HELP
Input display group number XXX
  • ‒ Now enter the display group number required.

Display group overview > < Final control diagnosis