| –
| Lift up locking clip -2- using screwdriver and pull gas strut off ball head pin -1-. |
| 1 - | Combi-ball head, 15 Nm |
Note | t
| If gas strut is to be reused, locking clip -2- must not be taken out of ball socket completely, otherwise locking clip will be damaged. |
| t
| To reduce the degree of opening of the rear lid, there is the option of installing shorter gas struts (by 20 mm). In this way, the opening height will be reduced to approx. 175 cm. |
|
|
|
