Golf Mk4
| Assembly overview - centre air intake and air guide, Golf R32 |
| 1 - | Bumper cover |
| q | Material - PP/EPDM |
| q | Removing → Chapter |
| 2 - | Air guide |
| q | Air guide can only be taken out with bumper cover removed → Item. |
| 3 - | Bolt |
| q | Qty. 6 |
| q | 1.5 Nm |
| 4 - | Speed nut |
| q | Qty. 6 |
| 5 - | Clip |
| q | Qty. 12 |
| 6 - | Centre air intake grille |
| q | Removal of air intake grille is only possible with bumper cover removed → Item |
| q | Removing: |
| – | Removing bumper cover → Item → Chapter. |
| – | Pull off clips - → Item. |
| – | Remove centre air intake grille. |
| q | Installing: |
| Installation is carried out in the reverse order. When doing this, observe the following: |
| – | Damaged clips → Item should be renewed. |
