volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing adapter, Golf R32 > < Assembly overview - bumper cover, Golf R32

Golf Mk4

Removing and installing bumper cover, Golf R32
   
Removing and installing bumper cover, Golf R32

Removing
–  Separate release lever from bonnet lock → Chapter.
–  Remove radiator grille → Chapter
–  Pull covers -9- for headlight washer system off bumper cover and unclip.
–  Loosen bumper cover -1- in area of wheel housing liner -4-.
–  Unclip left air intake grille -10- and right air intake grille -12-.
–  Unscrew bolts -2-. Pull bumper cover -1- off guide elements -3- (left and right).
–  Separate temperature sensor connector.
Installing
Installation is carried out in the reverse order.
   

Removing and installing adapter, Golf R32 > < Assembly overview - bumper cover, Golf R32