Golf Mk4
Installing side skirt |
1 - | Primer surface on side skirt |
2 - | Upper primer surface on sill panel |
q | Dimension a = 12 mm |
q | Dimension b = 10 mm |
q | The edge of the stone chip protection can be used as a reference point for the upper edge of the primer surface. |
3 - | Lower primer surface on sill panel |
q | The 3 surfaces should be determined by holding the side skirt in position |
4 - | Lower primer surfaces on side skirt |
q | 3 surfaces |
5 - | Upper adhesive bead |
q | Cross section of bead: |
t | Width = 5 mm |
t | Height = 7 mm (including residual material on sill panel) |
6 - | Lower adhesive bead |
q | Apply adhesive in two beads of 19 mm x 30 mm and a height of 7 mm to one surface |
q | 3 surfaces |