| Adjusting drive mechanism for sliding/tilting sunroof (zero position) |
| It may be necessary to adjust the zero position if the drive mechanism was not removed in the zero position or the sliding/tilting sunroof was closed or opened by means of the emergency device. |
| Drive mechanism removed but still connected electrically. |
| –
| Select automatic “open sunroof” function on rotary switch. |
| –
| Select automatic “close sunroof” function on rotary switch. |
| –
| Select automatic “tilt roof” function on rotary switch. |
| –
| Select automatic “close sunroof” function on rotary switch. |
| –
| Install drive in this position (zero position) with sliding/tilting sunroof closed. |
|
|
|
