volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Installing > < Removing and installing airbag control unit (J 234)
Removing
Removing
–  Disconnect battery earth strap → Electrical system; Rep. Gr.27.
–  Remove footwell trim panel -5-.
  WARNING
Refer to safety precautions when working on the airbag → Chapter.
   
–  Pivot bar -2- in opposite direction of arrow and pull connector -3- out of the control unit-1-.
–  Remove nuts -4- (Qty 3, 6 Nm) and pull control unit off studs.
  N69-0091

Installing > < Removing and installing airbag control unit (J 234)