volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing crash sensor for rear side airbag, driver and front passenger sides

Golf Mk4

Removing
Removing
–  Switch off ignition.
–  Disconnect battery earth strap → Electrical system; Rep. Gr.27.
–  Remove wheel housing trim.
t  Golf → Chapter.
t  Bora → Chapter.
t  Golf estate/Bora estate → Chapter.
  WARNING
Refer to safety precautions when working on the airbag → Chapter.
   
  WARNING
Electrostatic discharges may result in unintentional triggering of airbag. Therefore, the mechanic must electrostatically discharge him/herself before disconnecting the igniter and earth wires. This can be done by briefly touching the body or striker plate of the door.
–  Disconnect connector -2-.
–  Remove bolts -3- and -4-.

   

Installing > < Removing and installing crash sensor for rear side airbag, driver and front passenger sides