volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing driver or front passenger side airbag crash sensor

Golf Mk4

Removing
Removing
–  Switch off ignition.
–  Disconnect battery earth strap → Electrical system; Rep. Gr.27.
–  Remove driver or front passenger seat → Chapter.
  WARNING
Refer to safety precautions when working on the airbag → Chapter.
   
–  Loosen carpet -4- and insulation mat in vicinity of sensor.
  WARNING
Electrostatic discharges may result in unintentional triggering of airbag. Therefore, the mechanic must electrostatically discharge him/herself before disconnecting the igniter and earth wires. This can be done by briefly touching the body or striker plate of the door.
–  Detach connector -2- and remove the two bolts -3- (6 Nm).

   

Installing > < Removing and installing driver or front passenger side airbag crash sensor