| Checking operation of belt latch |
| –
| Push lock tongue into belt latch until it engages audibly. Check whether locking mechanism is properly engaged by pulling firmly on belt webbing. |
| l
| If latch tongue fails even once to engage properly in belt latch during at least 5 tests, renew seat belt complete with belt latch. |
| Checking release mechanism: |
| –
| Release seat belt by pressing button on belt latch with finger pressure. |
| l
| When belt is slack, latch tongue must spring out of belt buckle on its own. |
| l
| Carry out test at least 5 times. If latch tongue fails even once to spring out of latch, renew seat belt complete with belt latch. |
WARNING | Under no circumstances whatsoever may lubricant be used to eliminate noise or stiffness in belt buckle buttons. |
|
|
|
|
