Golf Mk4
|
– | Slide seat forwards. |
– | Unclip cover -1- from tunnel side cover strip -3-, remove screw -2-, unclip cover strip from seat rail -arrow A- and pull off -arrow B-. |
– | Unclip cover cap -4- from sill panel side cover strip -6-, remove screw -5-, unclip cover strip from seat rail -arrow C- and pull off -arrow D-. |
– | Slide seat to rear. |
– | Remove bolts -7- (23 Nm). |
– | Slide seat back out of guide rails. |
WARNING
|
– | Separate side airbag connector -1- from coupling station -2-. |
– | If fitted separate seat heater connector -3- from coupling station. |
Vehicles ► 07.00 |
– | Fit connector -4- (airbag adapter -VAS 5094-) into connector housing -5-. |
Vehicles 08.00 ► |
– | Fit airbag adapter -VAS 5232/1- in connector housing -5-. |