volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing front door trim on driver side

Golf Mk4

Removing
Removing
–  Switch off ignition.
   
–  Insert a flat screwdriver into lower separating joint between trim -1- and grip moulding -2- and carefully press off in direction of door trim.
  N70-0401
–  Unclip grip moulding -2- upwards out of door trim, to prevent damage to strut -1- do not grasp in the grip recess .
–  Press retaining lugs towards connector -3--arrow- and pull off.
  N70-0271
–  Remove seven screws -arrows-.
–  Unclip door trim -1- on sides with the aid of removal pliers -3392-.
–  Lift door trim upwards out of window slot.
  N70-0272
–  Unclip cable guide -1- out of bracket -3- in direction of arrow using a flat screwdriver -2- and detach cable hook -4-.
–  Detach connectors.
  N70-0423

Installing > < Removing and installing front door trim on driver side