volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing > < Removing and installing brake pressure sender 1 G201 and brake pressure sender 2 G214

Golf Mk4

Removing
Removing
–  Lay out sufficient lint free clothes in area of plenum chamber, engine and gearbox.
–  Draw off as much brake fluid as possible from brake fluid reservoir using brake filling and bleeding unit -VAS 5234- or extraction unit -V.A.G 1869/4-.
–  Connect bleed bottle hose to front left brake caliper bleed valve and open bleed valve.
–  Operate brake pedal at least 15 times so that brake master cylinder empties.
–  Close front left bleed valve.
   
–  Pull connector -arrow- off relevant brake pressure sender (the one to be removed).
a - Brake pressure sender 2 -G214- in primary piston circuit
b - Brake pressure sender 1 -G201- in secondary piston circuit
–  Remove brake pressure sender.
  N47-0107

Installing > < Removing and installing brake pressure sender 1 G201 and brake pressure sender 2 G214