| Bleeding brake system without brake filling and bleeding unit |
| –
| Attach bleeder bottle hose and open bleed valve. |
| –
| Pump brake fluid through system by pumping the brake pedal. |
| Ensure there is sufficient brake fluid in brake fluid reservoir. |
| –
| Close bleed valve with pedal held down. |
| –
| Repeat procedure until no air is present. |
| 1 - Front left brake caliper |
| 2 - Front right brake caliper |
| 3 - Rear left wheel cylinder / brake caliper |
| 4 - Rear right wheel cylinder / brake caliper |
|
|
|
