Golf Mk4
1 - | Dust cap |
q | Fit onto bleed valve |
2 - | Bleed valve, 10 Nm |
q | Apply thin coat of assembly paste G 052 150 A2 to threads before screwing in |
3 - | Cap |
q | Insert into mounting bush |
4 - | Guide pin, 30 Nm |
5 - | Bearing bush |
q | Insert into brake caliper |
6 - | Brake caliper |
7 - | Protective cap |
q | Do not damage when inserting piston |
q | Removing and installing → Chapter |
8 - | Piston |
q | Removing and installing → Chapter |
q | Apply thin coat of assembly paste G 052 150 A2 to piston before inserting |
9 - | Seal |
q | Removing and installing → Chapter |